Outline
Has a high gloss. This product has easy to operate processing, fast drying, low temperature resistance, good anti- stick each other excellent properties . Applicable to all types of polishing machine polishing .

  The main ingredient
Special water-based acrylic resin , a variety of additives .

  The main physical indicators
Test Method : PH reference to GB / T 14518-93; solid content with reference to GB / T 2793-1995; viscosity reference to GB / T 1723-93; gloss referring to GB / T 24289-2009; wear reference to GB / T 7706 - 2008 .
Appearance: milky white liquid , even without impurities ;
Odor: mild odor , non-irritating ;
PH value of 7-8 ;
Solid content : 40 ± 2% (105 ℃ ± 5 ℃ / 3h);
Viscosity : 25 ± 5s ( Tu -4 cups # 25 ℃);
Gloss :50-60 ° ( depending on paper , 60 -degree angle ) ;
Wear : 80g/m2 clean sheet of paper to test 300-400 times ( hard work , 20 N pounds pressure ) .

  Use
A dilution ratio: water or water and ethanol ( 1:1 ) diluted with a solvent , etc. , it is recommended to use the diluent of not more than 10% ; oil should satisfy the principle of paper , if excessive dilution may affect the gloss , resistance to wear resistance and leveling ; contrary diluted varnish can also cause inadequate leveling bad, drying speed is too slow.
2, the coating weight: depending on oil quality and gloss paper requirements , are generally inline coating coating weight 3 ~ 6g/m2, offline glazing coating weight 4 ~ 8g/m2;
3, the drying conditions : hot air drying or heating during the drying operation of the meter display device temperature not lower than 70 ℃.

  Precautions
1, the initial use of the company's products need to guide our technicians ;
2 Stir before using varnish , adjust the appropriate viscosity, inline coating under normal circumstances not directly used to adjust the viscosity , viscosity offline polish appropriately diluted varnish coating according to the requirements ;
3 , the varnish formulation particularly sophisticated, is prohibited without adding any other additional material recommended by the supplier , but also to prevent contamination, that may arise during use ;
4 , 12 hours after polishing varnish in order to achieve the best performance of the state , completely dry , there is a very good waterproof , anti- penetration, anti-slip effect.
5 , the device can be cleaned with water , dry the varnish can be used to remove isopropyl alcohol or ethanol .

  Package
1,50 kg or 200kg drum or according to customer requirements ;
2 , closed storage, stored in a cool dry place indoor ventilation , suitable storage temperature 5-30 ℃;
3 , antifreeze , prohibit exposure ;
4 , room temperature stability, shelf-life at 5-30 ℃ 6 months.